Accessories

The B.E.A.S.T Paver Edge Restraint

Edging is an absolute must for maintaining the integrity of your paver installation.
Without it, your pavers will separate and drift apart as the elements and foot traffic take their toll. Features include: one piece for both straight or curved patterns; bends up to a 90 degree angle for perfect corners; allows for installation of pavers on either side of edging; extra wide base for increased stability and withstands wide temperature
variances. Available in 8 foot sections.

Order # - C2030
Paver Edge Spikes (3/8” wide x 10” long)
Order # - CSPIKES
Polymeric Sand for pavement joints

Techni-Seal Polymeric Sand is a high-tech mix of graded sand and binder specially
formulated for the filling of paver joints. Unlike regular sand, Polymeric sand stays in place and effectively resists erosion caused by water, frost, wind etc. In addition, it prevents
insect infestation and inhibits weed growth. The product is applied dry and hardens after wetting. Available in two attractive colors: Granite Gray & Tan in 50 lb. bags.

Granite Gray - Order # - CJSANDG
Tan - Order # - CJSANDT
Paver Lighting

Kerr lights are installed flush with grade and are made of extremely strong plastic, so tough they can withstand the load of light vehicular traffic. The 12 volt system is safe and economical to operate. Capitol offers individual paver lights as well as all-inclusive lighting kits.

Individual Paver Light Order #:
4” x 8”.................................... CLIGHT48
6” x 6”.....................................CLIGHT66
6” x 9”.....................................CLIGHT69		 Paver Light Kits Order #:
8 lights - 4” x 8”...................... CKIT48
8 lights - 6” x 6”...................... CKIT66
6 lights - 6” x 9”...................... CKIT69


Block & Paver Cutter

With over 50 year’s experience, the Montolit line of Block and Paver Cutters are the finest machines in the world. This model features a higher cutting height allowing you to cut any paver and most wall products. Cuts can range from over 1” to just over 6”. The hardened steel blades provide a long life as well as produce clean and perfect cuts.

Cutting Width Cutting Height Weight
16” 1.2”-6.3” 127 lbs.

Order # CSPLITTER

Cleaning & Sealing Products

Paver Reneu™ products are designed to protect and enhance the appearance of concrete pavers. Paver Reneu products are tested to not yellow or color fade over time (even when exposed to constant sunlight) and they allow pavers to breath which prevents common moisture problems such as whitening and efflorescence. Paver Reneu also has the added benefit of preventing joint sand wash out.

Paver Reneu Flat Sealer

Ideal for applications where a non-glossy appearance is desired.

Size - 1 gallon - Order # CCERTERT1F
Size - 5 gallon - Order # CCERTERT5F		 Paver Reneu Super Gloss Sealer

The highest “solid” sealer on the market today offering superior gloss, greater long term protection.

Size - 1 gallon - Order # CCERTERT1G
Size - 5 gallon - Order # CCERTERT5G

 

Paver Reneu Natural Sealer

A premium penetrating sealer that is breathable, water repellent with higher solids to provide maximum long term protection.

Size - 1 gallon - Order # CCERTERT1N
Size - 5 gallon - Order # CCERTERT5N

 paverr

 

Paver Reneu Efflorescence Remover

Formulated to remove efflorescence, rust and other construction stains. Improves color uniformity and enhances appearance without damaging the surface.

Size - 1 gallon - Order # CREMOVER1

 

Paver Reneu Degreaser & Cleaner

Specifically formulated to remove grease and oil stains, tire marks and dirt from concrete surfaces. This environmentally safe product is economical for lighter duty daily or weekly cleaning.

Size - 1 gallon - Order # CSTRIPPER1

ads

Adhesives

Titebond is a professional strength adhesive for use on paving stones, retaining walls and other hard surface applications. It works well on dry, damp and cold surfaces to provide a long lasting bond.

Size - 29 oz.
Order # CADHESIVE-LG


Geogrid

Geogrid stabilizes the soil mass behind the retaining wall and ties the wall face to the earth being retained. Geogrid is placed between the layers of block at different intervals. The height of the wall being constructed, soil properties and any pressure on the wall all affect the length and placement of the geogrid. A variety of grid strength and roll sizes are available depending on engineering specifications and job needs.

Order # CGRID

Developed & Hosted by impress