3" & 6" Vintage & Cap

The combination of our 3” & 6” Vintage Wall and Cap recreates the timeless beauty of a naturally weathered stone wall with the extra strength and ease of installation that is second-to-none. With a remarkably broad range of colors and a unique double-sided face, it’s the ideal choice for retaining and free standing wall applications.

3” Vintage wall

6” Vintage wall

Corner & End pieces are sold by the piece.

All Vintage Retaining Walls can be built to a maximum total height of 40” without geogrid. Taller walls can be built up to a maximum total height of 24 feet with geogrid and when designed by a qualified engineer.

Installation note: When preparing the base block the ridge side must be placed facing down. To create a level base you can either remove the protruded ridge with hammer and chisel or excavate a channel within the foundation pad to accommodate the protruded ridge.

The advantages of the Vintage™ Wall System

Positioned on the underside of every Vintage Wall Stone is a 3” x 5” protruded ridge that locks into a channel located on top of each Vintage stone making installation quick and accurate.

The Vintage wall requires no pins or mortar and unlike rear-lip systems, you can build Vintage with a straight vertical appearance.